Before installing your Windows Server operating system on your nonpartitionable enterprise partition platform (NEPP), ensure the RAID controller is configured with the desired LUNs.
Note: The following procedure assumes the use of the partition image console launched from the platform management console Virtual Console page. Alternatively, you can cable a keyboard, video and mouse (KVM) to your platform, or use a LAN-based KVM solution.
Log on to the platform management console using the credentials your Unisys service representative created for you in step 1 of Overview of Installing a Customer-Supplied OS on a Nonpartitionable Enterprise Partition Platform.
On the Virtual Console page, click Launch Virtual Console.
A partition image console window appears.
Using the partition image console window to monitor the boot progress, boot the platform.
Immediately press the Ctrl and R keys simultaneously when the PowerEdge Expandable RAID Controller BIOS banner displays.
The BIOS Configuration Utility user interface is displayed.
Using your arrow keys and the Tab key to navigate the menus, view or modify the RAID configuration of the platform.